Messages

1

General Discussion / Re: Swap Left and Right Channels ...

« on: January 04, 2025, 08:37:04 PM »

Hi,

Sounds like I need to look into the Peace EQ. The AC3Filter code is limited to 5.1. I have been holding back on moving to a 7.1 speaker system because of that. 

Thank you for mentioning it!

2

General Discussion / Re: Swap Left and Right Channels ...

« on: January 04, 2025, 03:57:45 AM »

Ok, no problems. I have a 5.1 speaker system and wanted a custom way to direct the stereo channels to all my speakers.

Happy New Year!

3

General Discussion / Re: Swap Left and Right Channels ...

« on: January 04, 2025, 03:02:56 AM »

The configuration can be as complicated or simple as you want. The simplest way to just swap channels is to set the mixing matrix on the Mixer panel as follows: enter 1.0 in the R column of the L' row, 1.0 in the L column of the R' row and 0 in all the other matrix boxes; and disable the Delays. Uncheck all the options on the Options panel, disable the AGC and set the output format to match that of your source files. You should set all the boxes on the Gains panel to 0 and disable the DRC.

I suggest you read how it works and experiment with different settings.

Oh, I forgot to mention that this output plug-in directs it's output to another output plug-in. I use the Not So Direct v1.7.11 (out_notsodirect.dll) plug-in.

4

General Discussion / Re: Swap Left and Right Channels ...

« on: January 04, 2025, 01:58:54 AM »

The Not So Neo Output Mixer v1.0.7 (out_neo.dll) plug-in not only lets you configure a left and right channel swap, it also lets you configure stereo input channels into 5.1 output channels. It also lets you increase or decrease the volume of the input and output channels and change the sample rate and bit-depth of the source channels.

I have been using it or various variations for years with Winamp and WACUP. It is based on the matrix mixer AC3Filter software. Read the info on this site (https://matrix-mixer.sourceforge.net/) for how to configure the matrix.

5

General Discussion / Re: [Requesting help] Audio cuts off when starting playback of certain songs

« on: December 07, 2024, 04:21:08 AM »

Hi SuperVGBoy,

Happy Holidays!

I have 6,693 mp3s in my collection. They vary in length from 1:14 to 20:06 minutes (with various amounts of silence or low volume when they start) and all are decoded correctly by the old input plug-in (in_mp3.dll  v4.103). If your problem mp3s are encoded properly, maybe it's the output plug-in you're using that is causing your issue.

The out_notsodirect.dll output plug-in (v1.7.8.) has an option to remove silence at the start and/or end of tracks. It requires selecting the proper dB level and several seconds of buffer space. It doesn't work very well for me, so I just accept the few seconds of silence some of my songs start and/or end with. These few seconds of silence do not cut off any part of the actual songs.

The app "mp3 DirectCut" lets you delete (cut out) silence at the start and/or end of mp3s without needing to re-encode the mp3s. I have used it successfully to modify my mp3s that had more than a few seconds of silence at their beginning and/or end.

6

Preview Build Discussion / Re: Can't open WACUP when repeat is on and latest track I've played is missing

« on: November 09, 2024, 01:27:17 AM »

I don't know if it will help, but you can try changing the song in the playlist editor that WACUP tries to start with. Edit the "winamp.ini" file's "pilp=" parameter's value in the "[Winamp]" section to one less than the position in the playlist of the song you want to start with. For example, set the value to 9 if you want to start with the 10th song.

If you are using the Time Restore & AutoPlay plug-in (gen_timerestore.dll), also change the "track=" parameter's value in the "winamp.ini" file's "[Time Restore & AutoPlay]" section to the same value.

7

Wishlist / Feature Requests / Re: Cpro File Info... enhancement

« on: October 11, 2024, 01:09:20 AM »

Try right-clicking on the albumart image. It should offer an "Open Folder" command that will open the folder the song is in and highlight it.

8

Wishlist / Feature Requests / Re: Smart (intelligent matching, like average bpm) and Dynamic (filtered) playlist?

« on: September 17, 2024, 08:35:26 AM »

Hi thisisbbc,

Sorry for the late reply and sorry you're having problems with MusicIP Mixer and your flac files. Most of my files are mp3, but the flac files I have were analyzed without problems. My files are on a solid state NTFS drive, so that may be the reason why.

Anyway, here is another article about MusicIP Mixer (https://oldmanmetal.com/2019/04/15/musicip-mixer-playlist-generator-extraordinaire/) for any others who may want to try it. It explains how to register the app which will enable it's power tools. MusicIP Mixer will not use the BPM metadata tag when making playlists. But, it's been my experience that using BPM is not a good way to match the sonic similarity of other files, with a similar BPM, to that of a seed song.

9

Wishlist / Feature Requests / Re: a internal downloader

« on: August 07, 2024, 02:12:25 AM »

Hi dro,

I thought the Nullsoft Disk Writer plug_in only works with local files (converting formats and saving the result). Does it also allow saving streams WACUP is playing?

10

Wishlist / Feature Requests / Re: a internal downloader

« on: August 04, 2024, 08:22:55 AM »

Downloading a song without paying for it is stealing. Search google for many ways to download songs with and without paying for them. For example, there are sites that let you paste a link to a you-tube video that will extract the audio from the video into a downloadable mp3 file. You get the song and the artist (others involved) who performed gets nothing. There are also sites where you can download songs for a reasonable fee and the artists (and others involved) get paid.

11

Preview Build Discussion / Re: Help me with some ATF formatting please

« on: July 26, 2024, 04:01:55 AM »

The lower ATF string looks correct. There is a bug in the prior beta version #19516. Try the latest version #19762, if you have access to it. Otherwise you will need to wait for an updated public preview version.

12

Resolved Issues / Re: Letters

« on: June 30, 2024, 10:01:45 PM »

I think the OP is talking about accent marks (i.e diacritics, for example the mark over the second e in Beyoncé). What I usually do is copy and paste from a text file in which the accent mark is used. Another way is to use Alt codes when typing the letter. A google search can provide Alt code lists for all sorts of accent marks and/or symbols.

13

General Discussion / Re: Pop-up Notification Window for Classic Skins

« on: June 20, 2024, 04:05:35 AM »

Ok, I'll wait for you to come up with something. I also don't like that I can't make the old toaster plug-in only work with classic skins. When using modern skins, I get 2 notifier pop-ups. 1 provided by the skin and 1 by the plug-in.

14

General Discussion / Re: Pop-up Notification Window for Classic Skins

« on: June 18, 2024, 05:03:28 AM »

The old toaster plug-in also interferes with the correct skinning of classic skins when switching to another classic skin than the one I started a session with. The original developer of this plug-in stopped providing updates several years ago. So any suggestions for a replacement would be greatly appreciated.

15

General Discussion / Re: Files associations

« on: June 18, 2024, 04:31:40 AM »

Hi Eris,

I'm not saying Ysl's suggestion is not reasonable. I'm just saying WACUP provides other default ways to restart a song. Also, it is possible to reconfigure the previous button, so that it can provide a restart function. IMO, this is both the good and bad of WACUP (and Winamp for that matter), there are many different ways to do stuff and many configurable options that let the user change how stuff can be done.

Have you right-clicked on the previous button? You should get a pop-up menu with a lot of commands you may find useful. The first command listed (Previous) is what is executed by default when you left-click on the button.